Professional RC Hobby Drone Store, Keep on Updating……



QWinOut DIY FPV Drone Kit Welded S600 4 axle Aerial Quadcopter Unassembled w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor AT9S

QWinOut

Sale price $332.92 Regular price $369.99

Shipping calculated at checkout.

RM1641845738615257

QWinOut DIY FPV Drone Kit  Welded S600 4 axle Aerial Quadcopter Unassembled w/ Pix2.4.8 Flight Control GPS 7M 40A ESC 700kv Motor AT9S

Make a DIY drone by yourself becomes easy and interesting

Join us to start building a Quadcopter.

Please pay attention that this drone Kit set does not include battery,you can use your own,if you do not have that ,please contact us to recommend for you,thanks

 

Use Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller Integrate PX4FMU PX4IO Safety Switch Buzzer 4G SD and 7M GPS

- The board integrates with PX4FMU+PX4IO
- Pixhawk is with new 32 bit chip and sensor technology
Features:
- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;
- 14* PWM/ actuator output;
- Bus interface (UART, I2C, SPI, CAN);
- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;
- Provide automatic and manual mode;
- Provide redundant power input and fault transfer function;
- Color LED lamp;
- Multi tone buzzer interface;
- Micro SD to record flight data;
Processor:
- 32 bit 2M flash memory STM32F427  Cortex M4, with hardware floating point processing unit
- Main frequency: 256K, 168MHZ RAM
- 32 bit STM32F103 backup co processor
Sensor:
- L3GD20 3 axis digital 16 bit gyroscope
- LSM303D 3 axis  14 bit accelerometer /magnetometer
- MPU6000 6 axis accelerometer / magnetometer
- MS5611 high precision barometer
Interface:
- 5* UART, 1*compatible high voltage, 2*hardware flow control
- 2* CAN
- DSM/DSM2/DSM-X satellite receiver compatible input
- Futaba SBUS compatible input and output
- PPM signal input
- RSSI (PWM or voltage) input
- I2C
- SPI
- 3.3 and 6.6VADC input
- External USB MICRO interface
F19457-L
F19457-L
All motors and ESC has been Welded before shipping,what you need to do is assemble it and fly
IMG_4408

111

S600 Super Hard Arm 4-Axis Rack Quadcopter Frame Kit with Landing

Gear Skid makes your DIY Drone looks cool and strong

Wheelbase:  600mm
 
Tripod height: 250mm
 
Maximum available paddle:15 inch
 
Weight: 860g
 
Upper and lower center plate middle height: 36mm

F19457IMG_4077

Radiolink AT9S 2.4G 10CH DSSS FHSS Transmitter R9DS 9CH Receiver Radio Controller S-BUS PWM

AT9S Specification
1. Size: AT9S- 183*100*193mm, R9DS- 41*23*14mm
2. Weight: 0.88kg
3. Frequency: 2.4GHz ISM band (2400MHz to 2483.5MHz)
4. Modulation mode: QPSK
5. Channel bandwidth: 5.0 MHz & 250Kbps
6. Spread spectrum: DSSS ;FHSS
7. Adjacent channel rejection: >38dbm
8. Transmitter power: <100mW (20dbm )
9. Operating current: <90mA 12V
10. Operating voltage: 7.4 ~ 18.0V
11. Control distance: more than 900 meters ground, 1500 meters air, the actual control distance depends on the flying environment
12. Channel: 10 channels, 5-10 channels are customized
13. Compatible model: include all 120 degree and 90 degree swash-plate helicopter, all fix wings, glider and multi-rotor
14. Simulator mode: under the simulator mode the transmitter action turn off, change to power saving mode
15. Screen: 2.8 inches 16 colorful screen, 240*320 pixels
16. Support receivers: sells with R9DS (SBUS;PWM) ;Also support R10DS(SBUS PWM) and R6DS(SBUS;PPM;PWM)

 

R9DS 2.4G 9CH DSSS Receiver

1111

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)