MT1204 brushless motor, weighs only 5.9 grams, cool design, imported NMB dual bearings, 2mm inner shaft, efficient and durable smooth, Advanced power of 2.5~3.5 inch advanced Micro brushless FPV Racing Drone
KV option: KV5000
Stator Diamter: 12mm
Stator Length: 4mm
Inner Shaft Diameter: Φ2mm
Outer Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len): Φ15mm*16.2mm
No.of Cells(Lipo):KV5000 support 2-4s
Model: Caddx Ant
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC or PAL
Electronic Shutter: PAL: 1/50~100,000; NTSC:
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Min. Illumination: 0.001Lux@F1.2
Auto Gain Control: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14*14mm(with a bracket to 19*19mm)
Wide Power Input: DC 3.7-18V
Work Temperature: -20℃~+60℃
Work Humidity: 20%~80%
Weight: 2g (N.W.)
3s 11.1v 450mah Lipo Battery, IMAXRC B3 pro Charger (optional)
FRSKY version, FLYSKY version, without receiving version (optional)
Transmitter Remote Controller: (Mode 2 Left Throttle)
Flysky I6 Transmitter, Jumper T-Lite Open TX 16CH Hall Sensor Gimbal JP4IN Multi-protocol (optional)
Upgrade FPV: (Optional)
Double Antennas Built-in 3.7V 1200mAh Battery Support a key search frequency RaceBand 40 channel Auto-Searching Real-time video return 5.8G FPV Receiver
● Small size and lightweight;
● Low power consumption, Working current 300~330mA;
● Double antenna reception to make the signal more stable;
● RaceBand 40 channel, Auto-Searching;
● 3.0 Inch 480*320 dot high brightness LCD screen;
● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
● Universal USB charging interface;
● Real-time video return, Very low time delay;
● Bilingual menu in support of Chinese and English;
● Support external video signal input;
● Support AV signal output (Connect external DVR);
Please refer to our pictures to select the required kit, all parts are sold separately in our shop, you can add them as a spare. If you have any questions, please feel free to contact us.
1x (Caddx.us) Ant 1200TVL 1.8mm Global WDR 4:3 FPV Camera
4x Blue Propeller Guard
1x FD800 Mini Receiver for Frsky D8
1x (Jumper-XYZ) T-LITE JP4IN1 Transmitter
1x 3S 11.1V 450mAh Lipo Battery
1x IMAX RC B3 Pro Charger
1x 5.8G FPV LST-009 Goggles
1x Accessory kit
1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, do not over-discharge the battery (over-discharge may cause the battery to be uncharged and become useless). After the battery is fully charged, cuts off the power in time and cannot charge for a long time.
2. Do not modify any parameters and wiring without knowing the flight control and remote control. (It’s very important, we won’t compensate if it’s man-made damage!)
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. This product is not a toy and is not suitable for children under 14 years of age.
5. If you are a beginner, it is recommended to be assisted by an experienced adult.
6. Novices should pay attention: Do not use your hands to hold the plane when it is turning or let children touch it. Prevent being scratched.
7. When the plane falls or hits other objects at a high altitude during flight, please turn off the start switch in time, otherwise, it may cause damage to the flight control and motor. Check if the aircraft is not damaged and the screws are not loosened, and everything is normal, you can take off again.