Happymodel CINE8 85mm Brushless Cinewhoop FPV Racing Drone with 1200 TVL Camera Unassembled DIY KIT Version with Mount Compatible for Insta360

Item Name

Qty

Cine8 Frame

1

Option1: CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS

1

Option2: CrazybeeF4 V3.1 with External Fli14+ receiver

Option3: CrazybeeF4 V3.1 with External DSMX receiver

Option4: CrazybeeF4 V3.1 with External TBS crossfire nano receiver

Happymodel EX1202.5 KV8000 brushless motor

4

Gemfan D51(2020-4) Cinewhoop Props

1

Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera

1

5.8G 25mw~400mw Whoop_VTX_HP

1

TypeC USB Adapter

1

Tattu 3S 11.4V 450mah battery

1

Motor

Mode: EX1202.5 KV8000
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:2.5mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ14mm*14.5mm
Weight(g):4.4g
No.of Cells(Lipo):2-3S

Propellers

Material:PC

Weight:0.91g

Pitch:2in

Props Dia:50.3mm

Center Thickness:4.5mm

Center Hole Dia:1.5mm 3 holes

Flight controller

(Frsky SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(Redpine SPI RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External Speki+ RX version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR

(External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC  Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 2.9V-8.7V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5V 1A BEC

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 12A continuous peak 15A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

CC2500 Hardware

Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol

Channels: 8ch
Failsafe support

Diversity 2.4G receiver system
No ground interference: above 300meter

External Flysky Fli14+ receiver

Channel: 14
Protocol: AFHDS-2A
2.4G Mode: The second generation of an enhanced version of the automatic FM digital system
Antenna Length: 50mm  (single antenna)
Input Power: 4.0-6.5V DC
Weight: Only 1g
Size: 19.5mm*12mm*5mm
Color: Black
Signal Output: IBUS
RSSI Output: Channel14
No ground interference: >500m

External Speki+ receiver

Dimension: 20mm*12.4mm*5mm
Support protocol: DSM2/DSMX
Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider)
Antenna connector: I-PEX MHF3
Antenna length: 70mm
Input voltage: 3.6v~13v
Input current: 100ma
Channels: Max12ch(usually channel 12 is used for RSSI)

External TBS CRSF Nano receiver

Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible

5.8G 400mw VTX

Output power: 25mw~400mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 400mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race band 

SmartAudio ready

Caddx ANT 1200tvl camera

Image Sensor: 1/3" CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL 

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: 0.001Lux@F1.2

Auto Gain Control: YES

BLC: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Work Temperature: -20℃~+60℃

Weight: 2g (N.W.)