Happymodel Crazybee F4 Pro V2.0 1-3S Compatible Flight Controller for Mobula7 Mobula 7 HD Internal Frsky/Flysky/DSM2/DSMX Protocol RX

Happymodel

  • $38.99
Shipping calculated at checkout.


Happymodel Crazybee F4 Pro V2.0 1-3S Compatible Flight Controller for Mobula7 Mobula 7 HD Internal Frsky/Flysky/DSM2/DSMX Protocol RX

Notes: 

The biggest differences between Crazybee F4 PRO V1.0 and V2.0 are:

V2.0 could handle 1-3s Lipo/LiHV

V1.0 could handle only 1-2s Lipo/LiHV

V2.0 use bigger bind and boot button , change the BAT/GND pad to “through hole”

Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
ESC MCU Upgraded to EFM8BB21
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible)
DSMX version Built-in Serial-based DSM2/DSMX compatible satellite receiver(Default RX2 was used for DSM2/DSMX receiver)
No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
Built-in Betaflight OSD (SPI Control)
Built-in Current meter sensor Max up to 28A
Current meter scale set to 1175
Built-in 5V 1A Buck / Boost with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Multi Serial port support
Fully compatible with almost Brushless whoop drone
Weight:4.3g
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600
Receiver support No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.

Firmware target:

Frsky version  betaflight_4.0.0_CRAZYBEEF4FR.hex

Flysky version betaflight_4.0.0_CRAZYBEEF4FS.hex

DSM2/DSMX version betaflight_4.0.0_CRAZYBEEF4DX.hex

No RX version betaflight_4.0.0_CRAZYBEEF4DX.hex

 

Crazybee F4FR PRO frsky version firmware target CrazybeeF4FR

betaflight_4.0.0_CRAZYBEEF4FR_20181211

Crazybee F4FS PRO flysky version firmware target CrazybeeF4FS

betaflight_4.0.0_CRAZYBEEF4FS_20181218

Crazybee F4DX PRO DSM2/X version and Crazybee F4 PRO No RX version firmware target CrazybeeF4DX

betaflight_4.0.0_CRAZYBEEF4DX_20181211

Betaflight Official will update firmware target from V3.5.5

 

Package include:
1 x CrazybeeF4 PRO flight controller
3 x Power cables
1 set Shock absorbing rubber and screws


We Also Recommend