Professional RC Hobby Drone Store, Keep on Updating……



Happymodel Moblite6 65mm DiamondF4 1S FPV Racing Drone for Whoop, EFM8BB21 ESC 19000KV Motor ultra light Brushless Mini Drone with 800TVL Camera

Happymodel

Regular price $89.00

Shipping calculated at checkout.
Happymodel Moblite6 65mm DiamondF4 1S FPV Racing Drone for Whoop, EFM8BB21 ESC 19000KV Motor ultra light Brushless Mini Drone with 800TVL Camera
 
Preorder Item: 
Frsky version will be shipped on December 20th
Flysky version will be shipped on January 10th


Specifications:
Brand Name: Happymodel
Item Name: Moblite6 1S 65mm ultra light brushless whoop
Wheelbase: 65mm
Size: 80mm*80mm*25mm
Weight: 18.5g (without battery)
Weight:26g(with Original 1s 300mah Lipo battery )

Features:
The lightest 1s 65mm brushless whoop
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors 
VTX power switchable 25mw~200mw
Low profile Canopy design

Package includes:
65mm Frame (Mobula6 frame)     X1
Recever X1: 
Option1: DiamondF4 FR built-in SPI Frsky receiver
Option2: DiamondF4 FS built-in SPI Flysky receiver    
EX0802 KV19000 Unibell brushless motor    X4
Gemfan 1219 31mm propeller(4cw+4ccw)    X1
Runcam Nano3    X1
Built-in 5.8G 40ch 25mw-200mw VTX  X1
1s 300mah Lipo battery X2
1S USB charger    X1
Propeller disassemble tool  X1
Screwdriver    X1
Happymodel Carry case    X1

 

Motor

Mode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Flight controller

(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR

(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard Flysky SPI receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
Failsafe support

Onboard 5.8g VTX

Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels(include Race band)

Smartaudio ready

Runcam Nano3

Model: Runcam Nano3

Image Sensor: 1/3" CMOS

Horizontal Resolution: 800TVL

Lens :  2.3mm(M6.5) FOV 14

Signal System: PAL/NTSC Non Switchable

S/N Ratio: >50dB

Electronic Shutter Speed: Auto

Auto Gain Control (AGC): Auto

Min. Illumination: 0.01Lux@1.2F

D-WDR: Auto

Day/Night: Color

Power:DC 3-5.5V

Current: 170mA@5V 180mA@3.3V

Housing Material: ABS

Net Weight: 1.2g

Dimensions: L14mm*W14mm*H9mm

Lipo Battery

Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5g

Connector: PH2.0

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)