Professional RC Hobby Drone Store, Keep on Updating……



Happymodel Moblite7 1S 75mm ultra light brushless whoop FPV Racing Drone DiamondF4 FR built-in SPI 19000KV Motor Mini Drone with Carry Bag

QWinOut

Regular price $89.00

Shipping calculated at checkout.
Happymodel Moblite7 1S 75mm ultra light brushless whoop FPV Racing Drone DiamondF4 FR built-in SPI 19000KV Motor Mini Drone with Carry Bag

Preorder Item: 
Frsky version will be shipped on December 20th
Flysky version will be shipped on January 10th



Specifications:
Brand Name: Happymodel
Item Name: Moblite7 1S 75mm ultra light brushless whoop
Wheelbase: 75mm
Size: 97mm*97mm*25mm
Weight: 19.5g (without battery)
Weight:36g(with Original 1s 650mah Lipo battery )

Features:
The lightest 1s 75mm brushless whoop
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors 
Low profile Canopy design
VTX power switchable 25mw~200mw

Package includes:
75mm Frame    x1
Recvceiver     x1
Option1: DiamondF4 FR built-in SPI Frsky receiver
Option2: DiamondF4 FS built-in SPI Flysky receiver    
EX0802 KV19000 Unibell brushless motor    x4
HQPROP 40MMX2 propeller(4cw+4ccw)    x1
Runcam Nano3    x1
Built-in 5.8G 40ch 25mw-200mw VTX    x1
1s 650mah Lipo battery     x2
Propeller disassemble tool    x1
Screwdriver    x1
Happymodel Carry case    x1

 

Spare parts specifications:

Motor

Mode: EX0802 19000KV
Configu-ration:9N12P
Stator Diamter:8mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
Weight(g):1.7g
No.of Cells(Lipo):1S only

Flight controller

(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR

(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV

Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version

SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model

Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m

Onboard Flysky SPI receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
Failsafe support

Onboard 5.8g VTX

Output power: 25mw~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels(include Race band)

Smartaudio ready

Runcam Nano3

Model: Runcam Nano3

Image Sensor: 1/3" CMOS

Horizontal Resolution: 800TVL

Lens :  2.3mm(M6.5) FOV 14

Signal System: PAL/NTSC Non Switchable

S/N Ratio: >50dB

Electronic Shutter Speed: Auto

Auto Gain Control (AGC): Auto

Min. Illumination: 0.01Lux@1.2F

D-WDR: Auto

Day/Night: Color

Power:DC 3-5.5V

Current: 170mA@5V 180mA@3.3V

Housing Material: ABS

Net Weight: 1.2g

Dimensions: L14mm*W14mm*H9mm

Lipo Battery

Capacity:650mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 60mmx18mmx8mm
Weight: 16g

Connector: PH2.0

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)