Happymodel Moblite7 1S 75mm ultra light brushless whoop FPV Racing Drone with Radio Controller DiamondF4 FR built-in SPI 19000KV Motor Mini Drone with Carry Bag
Frsky version will be shipped on December 20th
Flysky version will be shipped on January 10th
Brand Name: Happymodel
Item Name: Moblite7 1S 75mm ultra light brushless whoop
Weight: 19.5g (without battery)
Weight:36g(with Original 1s 650mah Lipo battery )
The lightest 1s 75mm brushless whoop
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors
Low profile Canopy design
VTX power switchable 25mw~200mw
75mm Frame x1
Option1: DiamondF4 FR built-in SPI Frsky receiver
Option2: DiamondF4 FS built-in SPI Flysky receiver
EX0802 KV19000 Unibell brushless motor x4
HQPROP 40MMX2 propeller(4cw+4ccw) x1
Runcam Nano4 Lite x1
Built-in 5.8G 40ch 25mw-200mw VTX x1
1s 650mah Lipo battery x2
Propeller disassemble tool x1
Happymodel Carry case x1
Spare parts specifications:
Optional Radio Transmitter:
1. FEICHAO LiteRadio OpenTX 2.4G 8CH Radio Transmitter with Cimbal Compatible for Frsky D8, D16 FCC, D16 LBT for FPV Racing Drone
Mode: EX0802 19000KV
No.of Cells(Lipo):1S only
(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
(Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC
Onboard 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
Onboard Flysky SPI receiver Version
SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 200~300m
Onboard 5.8g VTX
Output power: 25mw~200mw switchable
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels(include Race band)
Runcam Nano4 Lite
Model: RunCam Nano4 Lite
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
Current: 170mA@5V 180mA@3.3V
Housing Material: ABS
Net Weight: 1.0g
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
- Designed for FPV racing starters, The trainer function is available for this LiteRadio transmitter. It is useful for FPV racing student in training.
- Supports Bayang protocol and Frsky protocol (D16/ D8), easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
- LiteRadio is powered by OpenTX firmware. Totally 8 channels and has a hobby grade gimbal. With the hobby grade gimbal and adopted the rubber coat, makes it more ergonomic
- This radio tansmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulator such as Compatible with EREADRONE.
- LiteRadio transmitter runs the OpenTX 2.2.4 firmware. OpenTX comes with a computer-based graphical user interface, OpenTX Companion. Pilots could use OpenTX Companion is trim the gimbal central value.
After the latest round of beta test, LiteRadio is back to the market with the huge improvements based on the original version.
-Supports Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
-Built-in charging module, support USB charging
-Adopted the rubber coat and add weight, makes it more ergonomic
-Add vibration motor, provide a vibrating prompt
-Redesign the power button, make it crystal clear and better for the LED indication
Frequency Range: 2.4G (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
System: Bayang Protocol / Frsky Protocol
Model Type: Multi-rotor
Support USB Charging
Support FPV Simulator Connected
Output: PPM, support Student Radio Mode
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: 350mAh 2S Battery
Weight: 227.4g (with battery)
How to change the protocol (D16/D8 Version):
To change FrSky protocols (FCC D16, EU D16, or D8), you first have to power it off, then press and hold the bind button while you power it back on. Then it will flash the code to indicate which protocol it is on.
LED Status - Protocol Version:
Flash Once - Frsky D16 FCC;
Flash Twice - Frsky D16 LBT;
Flash Three Times - Frsky D8
Manual for LiteRadio Radio Transmitter
LiteRadio Configuration - OpenTX Companion
Setup E.G. #1 - Trim the Gimbal Central Value
2. Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter Radio System for RC Heli Glider Quadcopter DIY Drone
The Flysky FS-i6 is a affordable, 6CH 2.4G radio system and also a very simple setup for your RC vehicle. The automatic frequency hopping digital system provides a strong, reliable 2.4GHz signal, so rest assured you'll always be in control. Included in the package is a 6-channel mini receiver that will fit in most vehicles. The ergonomic feel of the trasnsmitter will feel good in your hands even after long track sessions.
Reliable, interference free 2.4GHz AFHDS 2A signal operation.
Use only 4 * AA batteries for transmitter.
Quick and extremely stable in performance.
Simple binding procedure.
Works in the frequency range of 2.405 to 2.475GHz.This band has been divided into 142 independent channels,each radio system uses 16 different channels and 160 different types of hopping algorithm.Silm design on transmitter for easy handling!
This radio system uses a high gain and high quality multi directional antenna,it covers the whole frequency band. Associated with a high sensitivity receiver,this radio system guarantees a jamming free long range radio transmission
Each transmitter has a unique ID,when binding with a receiver,the receiver saves that unique ID and can accepts only data from the unique transmitter.this avoids picking another transmitter signal and dramatically increase interference immunity and safety.
This radio system uses low power electronic components and sensitive receiver chip.The RF modulation uses intermittent signal thus reducing even more power consumption.
AFHDS2A system has the automatic identification function,which can switch automatically current mode between single-way communication mode and two-way communication mode according to the customer needs.
AFHDS2A has built-in multiple channel coding and error-correction,which improve the stability of the communication,reduce the error ratio and extend the reliable transmission distance.
Model type: fixed-wing/glider/helicopter
RF range: 2.405-2.475GHz
RF power: less than 20dBm
2.4G system: AFHDS 2A and AFHDS
Code type: GFSK
Low voltage warning: less than 4.2V
DSC port: PS2; output: PPM
Charger port: no
ANT length: 26mm * 2(dual antenna)
Power: 6V 1.5AA * 4 (Not included)
Display mode: Transflective STN positive type,
128 * 64 dot matrix VA72 * 39mm, white backlight.