Professional RC Hobby Drone Store, Keep on Updating……



Hobbywing SkyWalker BEC 2-3S Lipo Speed Controller 20A /15A Brushless ESC for RC Aircraft Helicopter

Hobbywing

Sale price $13.19 Regular price $13.08

Shipping calculated at checkout.

Hobbywing SkyWalker BEC 2-3S Lipo Speed Controller 20A /15A Brushless ESC for RC Aircraft Helicopter

Specifications 

Name : Hobbywing SkyWalker Brushless ESC

Output : Continuous current 20A, short-time current 25A (less than 10s)

Input :2-3S Lipo

BEC :5V @ 2A (Linear Mode)

Throttle Signal Refresh Rate : 50Hz-432Hz

Maximum speed: 210000 2-pole motor rev / min, 6-pole motors 70,000 rev / min, 12 pole motors 35000 rev / min

Size : 42 x 25 x 8mm

Weight: 19g

Features 

2.1 Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury;
2.2 Throttle range calibrated function: to adapt the throttle differences between different stroke, improve the linearity of throttle response;
2.3 programmed project (available throttle stick or card LED parameter settings):
      ()Brake setting: No brake / with brake;
      ()Battery type: Lithium battery / NiMH;
      () Low Voltage Protection Mode: Soft Shutdown / hard off;
      () Low Voltage Protection Threshold: low / medium / high;
      () start mode: Normal / Soft / Super-soft and start;
      () Timing: low / medium / high;
      ()Restore factory defaults;
2.4 Comprehensive protection features:
      ()undervoltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power;
      ()Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty "beep" warning tone;
      () Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high;
      () remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output;