Professional RC Hobby Drone Store, Keep on Updating……

iFlight Chimera4 Analog 4S FPV LR BNF FPV Drone 178mm Camera 4inch SucceX-E F4 V2.1 FC Built-in 35A 4-in-1 ESC 1404 Motor FPV Racing Drone


Regular price $216.94

Shipping calculated at checkout.
iFlight Chimera4 Analog 4S FPV LR BNF FPV Drone 178mm Camera 4inch SucceX-E F4 V2.1 FC Built-in 35A 4-in-1 ESC 1404 Motor FPV Racing Drone

Introducing our first ultra-light LongRange 4inch BNF for every terrain. Newest iFlight SucceX hardware on board coupled with our XING 1404 motors in different kv classes. Slow crusing or speedy action, theres something for every taste. Get flight times above 15min using at least 4S 850mAh packs. Go crazy and strap a Li-On 4S pack on and go even further, depending on capacity and weight!

GPS Rescue ready for easy recovery in case of signal loss, or even if you've been surfing those mountains and suddenly can't find the way back home.. Betaflight OSD pre-setup GPS elements will show you the way! Turbo Eos V2 2.1mm lens 16:9 NTSC camera, Custom iFlight 160mm LR antenna for best signal coverage even at long distance.

- Sub 250g long-range quad
- XING 1404 3000KV(Cruiser) or 3800KV (Speed Cruiser) Ultralight motors (Optional)
(Camo or black color of the motor is random, If you have any special request, please leave a message after placing your order)
- X-Geometry body for high performance handling and max. authority on pitch axis
- DC (DeadCat geometry) bottom plate available (additional item, no props in view) 
- GPS pre-installed for more safety at distance
- SucceX-E mini F4 +35A 4in1 ESC Flystack
- Naked ready for GoPro
- 360° TPU protection, FPV cam protection and antenna mounts
- Turbo Eos V2 2.1mm 16:9 NTSC

FRAME //: Chimera4
- Wheelbase: 178mm
- Main body dimension: 136.8*114.8mm 
- Bottom to top distance: 28mm
- Arm thickness: 4mm
- Bottom plate thickness: 4mm
- Top plate thickness: 2mm
- TPU Camera plate thickness: 2mm 
- FC: 25.5*25.5mm/20*20mm/16*16mm
- FPV Cam: 19mm Micro / 20mm 

ELECTRONICS // SucceX-E mini F4 Stack (35A 4-in-1 ESC):
SucceX-E mini F4
- MCU: 168MHz STM32F405
- Gyro: MPU600
- Blackbox: 8MB
- Betaflight OSD: YES
- BEC: 5V 2.5A
- Uarts: 4
- ESC Telemetry: yes
- INA Pad: nuart2
- Input voltage: 2-6S
- Size: 25*25mm /20*20mm φ3 mounting
- Weight: 4g
- Firmware: BETAFLIGHTF4
- Mounting hole: 20*20mm,φ3mm
- Size: 25*25mm
NOTE: F.PORT protocol RX input support, telemetry not supported. 

ESC // SucceX-E mini 35A 
MCU: BB21 F16G
Capacitance: 470uF/50V
Current Sensor: Yes
Input: 2-6S LIPO
Constant: 35A / Burst: 40A
Supports up to Dshot600, Proshot, Oneshot, Multishot 
Target: G-H-30
BLHeliSuite download:
Weight: 6.9g
Mounting pattern: 20*20, φ3mm with Grommets φ2mm
Dimensions: 31*30mm (including the power pads)

VTX// SucceX-Force 800mW adjustable VTX
- Input voltage: 5V
- Output voltage/ Max current: 5V 1A
- 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW
- Channel: 48
- size:36*36*3mm
- PIT/25mW/200mW/400mW/800mW

BNF // Parts list (Build)
Prebuilt and indoor tested Quadcopter
- 1x Chimera4 frame
- 2x Albatross RHCP ipex 160mm antenna
- Turbo Eos V2 2.1mm 16:9 NTSC
- SucceX Force 5.8GHz 800mW VTX Adjustable
- 2setsx Nazgul 4030 props (Set of 2 - Color may vary)
- 2x 15*150mm Microfiber PU Leather Battery Strap (Color May Vary)

Additional Suggested Parts (not included)
- 4S 850mAh/ 4S 1100mAh
- TPU Naked Mount for GoPro
- 1404 3800KV motor, suggested battery: 4S 650maa-850mah, Flight times about 5-10 minutes, and the flight can do actions.
- 1404 3000KV motor, suggested battery 4S 850-1100mah, Flight times about 10-15 minutes

Customer Reviews

No reviews yet