iFlight Nazgul5 V2 HD 5inch 240mm FPV Drone BNF W/ XL5 V5 frame/Caddx Nebula Pro Digital HD System/SucceX-E F7 45A Stack

 

Feature:

Pls note that we have sell 4s which the motor is 2207 2750KV.If you need 6s(2207 1800KV)  Pls contact us and leave the messages.If you have any questions pls contact us.

4S Motor is  2207 2750KV

6S Motor is  2207 1800KV

4 Version are optional : no RX; with XM+ RX;with R-XSR RX; with TBS NANO RX

Important:  no RX Version is Compatible with DJI Remote Controller and is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use that, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.

Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Nebula Pro Digital HD System on it. We sticked the lighter Caddx Nebula Pro on one of our new updated XL5 V5 FPV frames.

Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings.

FACTORY SETUP and WIRING DIAGRAM: This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.
 

Specification:

5mm arm design for more durability

Easy-Swap arms

LED illuminated Logo

XING-E 2207 motors and NAZGUL 5140 props

5" version also fits 5.1" style propellers

Popular True-X configuration

TPU crash-guards

Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

SucceX-E F7 45A flight stack

XING-E 2207 FPV Motor ?6S 1800kv/4S 2750kv)

Wheelbase: 240mm

Body size: 170*170mm

Propeller size: 5 inch /5.1 inch

FC pattern: 30.5*30.5/20*20 mm

FPV cam spacing: 19mm

Prebuilt and tested Quad

1x XL5 V5 Frame

1xCaddx Nebula Pro Digital HD System

1xAlbatross LHCP RP-SMA 5.8g antenna

2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)

1set x 20*200mm + 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

SucceX-E F4 Flight controller

MCU: STM32F405

Gyro: MPU6000

Betaflight OSD?YES

Blackbox 8MB

4X Uarts?1 2 3 6 )

8 x Dshot/Proshot/Oneshot output

8 x individual ESC power/ signal pads

1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

VTX telemetry: YES

WS2812 led Strip: YES

Beeper?YES

Input?2-6S?Max 8S?

BEC?5V/2.5A cont

Firmware target : BETAFLIGHTF4

Mounting?30.5*30.5mm??4mm with Grommets ?3mm

Dimensions?36*36mm

SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

Dimension: 40*43mm

Mounting Holes: 30.5*30.5mm/?3mm

Supports 2-6S Lipo input

STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

Current sensor: YES

BEC: NO

DShot150/300/600/1200/MultiShot/OneShot etc. Supported

Target: G-H-30 BLS 16.7

Additional Suggested Parts(not included)

Competible with DJI HD FPV Goggles

Radio Controller

4S 1550mAh/ 6S 1300mAh Battery

Camera Mounts Competible with GoPro