iFlight TITAN XL5 250mm 5inch 4S/6S FPV Racing Drone PNP BNF with SucceX-E F4 45A Stack/XING 2208 Motor GPS Module

HIGHLIGHTS:

- 6mm arm design for more durability

- XING 2208 motors for more power

- GPS pre-installed for more safety at distance

- Variable GoPro TPU mount (supports ND-Filter inserts)

- 360° TPU protection and Antenna mounts

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!

- GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

- Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!

FRAME // TITAN XL5：

- Weight ：145g

- Wheelbase: 250mm

- Main body dimension: 185*133mm

- Bottom to top distance: 30mm

- Arm thickness: 6mm

- Bottom plate thickness: 2mm

- Top plate thickness: 2mm

- Camera plate thickness: 2mm (2.5mm included TPU inserts)

ELECTRONICS // SucceX-E F4 Stack (45A 4-in-1 ESC)：

SucceX-E F4

- MCU：STM32F405

- IMU：MPU6000

- Betaflight OSD：YES

- Blackbox：8MB

- 4X Uarts（1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX protocol：YES（IRC Tramp）

- WS2812 led Strip：YES

- Baro：No

- Beeper：YES

- Input：2-6S（Max 8S）

- BEC：5V/2.5A cont

- Firmware :betaflight_4.0.5_BETAFLIGHTF4.hex

Product Link

SucceX-E 45A 4in1

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Target: G-H-30 BLS 16.7

-BLHeliSuite download: http://www.mediafire.com/file/1tn449x6815upat/BLHeliSuite16714901.zip/file

Product Link

BNF // Parts list (Build)

-1x  TITAN XL5 4S 6S FPV Drone - BNF

- 2 sets Nazgul 5140 propellers

- 1x GPS Module

Additional Suggested Parts (optional)

- Battery 4S 1550mAh，6S 1300mAh

- Adjustable GoPro mount (0-60°)