JMT OctopusX1 127mm FPV Racing Drone with Carbon Fiber Frame MiniF4 Flight Controller 20A 4 in 1 ESC 3inch Propellers FS I6 Transmitter Flysky Version

JMT

Regular price $226.94

Shipping calculated at checkout.

JMT OctopusX1 127mm FPV Racing Drone with Carbon Fiber Frame MiniF4 Flight Controller 20A 4 in 1 ESC 3inch Propellers FS I6 Transmitter Flysky Version

FLYSKY version compatible with FS-i6 AFHDS-2A remote control
All accessories are welded and assembled and tested before shipping.

Package include
1x OctopusX1 127mm Carbon Fiber Frame Kit
1x 3D Print PLA Camera Mount
4x 3018 PC-3inch Propellers (4Pairs)
4x XT1105-5000KV Motors
1x 20A 4 IN 1 ESC
1x MiniF4 Flight Controller
1x FSD-252VTX
1x Nano 2 NTSC FPV Camera
1x Battery tie
1x XT30 power filter
1x FS-RX2A Pro Receiver
1x FS I6 Transmitter
2x Transmitter Rocker Mount (Red)

Flight control
Input voltage: 2-4 S Lipo
Built-in OSD Betaflight
-com output 5V @ 2A BEC,
Without black box
-Support BLHeliSuit configuration
-Also supports Cleanflight and INAC firmware for falsh
-Support PPM, SBUS (RX1), IBUS (RX6), ds m2 (RX6) receiver
Firmware: BetaFlight 3.20 SD

Paddle
Size: 3018
Color: transparent gray
Material: PC
Weight: 0.8g

Motor
Weight: 6.2g
Motor installation size: M2Φ9
Shaft diameter: Φ1.5
Maximum lithium battery: 3S
Recommended support: 2-3 inches

ESC
Product name: 15A Blheli_S BB2 4 in 1 ESC
Maximum current: 20A / 30A (5S)
BEC: No
Input voltage: 2-4S
Weight: 4.8g
Size: 27x31mm (PCB)
Mounting hole: 20x20mm
-D-shot 600 default
-Support D-shot 150, D-shot 300, Oneshot125 and Multishot

camera
Image sensor: 1/3 "CMOS
Horizontal resolution: 700TVL
Lens: 2.1mm (M8) FOV 155 °
Signal system: NTSC
Day / Night: Color
Power supply: DC 3-5.5V
Net weight: 3.2g
Size: 14x14x16mm (LxWxH)

VTX
1.40 channel
2. Support touch switch and PWM / touch switch selection
Channel); support touch switch to select frequency group
3. Support 25mW / 200mW selection, five LED high power display
4. LED display channel and status information
5. With OSD input and output interface
6. Directional rod antenna;
7. Working voltage (power input): 5V working current: 25mw-300ma, 200mw-500ma
8. Small and light design: peripheral size 27 * 27mm, weight 4g