JMT Rooster 225 DIY FPV RC Racing Drone 225mm Carbon Fiber Airframe with OmniF4 Pro(V2) FC Built in OSD/BEC 4 in 1 BLHeli-S ESC 2306-2400kv 3-4S Motor 5.8G VTX 700TVL 2.8mm Lens PAL Camera
PNP: No battery & charger, No remote control
PNP with battery & charger: No remote control
ARF:(Almost Ready to Fly), full set, need to assemble by yourself
（Please refer to our pictures to choose the combo you need, and all of the parts can be sold separately in our shop, you could add as spare. Any questions, please feel free to contact us.）
Remote control distance: about 300 meters
Life time: about 10 minutes (the specific flight time depends on your flight actions)
Support PPM, ibus, sbus three receivers
Three-tier tower installation is easy
Flying is more violent
Support 3-4S battery
Optional parts: 1x Battery: 11.1V 1500MAH 40C XT60 lipo battery 1x Charger: IMAXRC B3 pro charger 1x Remote control: Jumper-XYZ T12 Pro Hall transmitter 1x Receiver: NR502T-F2 16CH SBUS RC Mini Receiver Support Telemetry RSSI Compatible for Frsky D16 1x FPV FPV Goggles: 3 inch 480 X 320 Display Double Antenna 5.8G 40CH Built-in 3.7V
1 Do not charge the battery when you are not at home. Do not charge the battery immediately after flying. Do not over-discharge the battery (over-discharge may cause the battery to be overcharged and become invalid.) The battery cannot be charged for a long time after the battery is fully charged.
2. Do not modify any parameters and wiring without understanding the flight control and remote control.
3. Turn on the remote control before powering the aircraft. Unplug the power after the flight, and then turn off the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. When there is no wind, you can fly outdoors in open areas to avoid flying in crowds and surroundings with interference.
5. The product is unassembled / welded. If you have any technical and assembly issues, please feel free to contact us. We have a dedicated technical team to respond to related issues. If the customer needs to assemble, please feel free to contact us, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
6. This product is not a toy and is not suitable for children under 14 years of age.
7. Please read the instructions carefully before any use, if you are a beginner, it is recommended to be assisted by an experienced adult
8. Because the plane is relatively small, do n’t fly high and high and fly in your own sight. 9. Novices should pay attention not to pick up the plane with your hands or let children pick it up to prevent it from being scratched.
10.Please turn off the start switch in time when the aircraft falls into the wall at high altitude or hits other objects, otherwise it may cause damage to the flight control motor, etc. Check the aircraft for damage, whether the screws are loose, and everything is normal before you can take off again.