Happymodel Larva X 2-3S 2.5inch Brushless FPV Racing Drone 100mm Wheelbase Crazybee F4 PRO V3.0 AIO Flight Controller Camera Angle Adjustable 25mw~200mw VTX

Happymodel

  • $95.00
Shipping calculated at checkout.


Preorder Happymodel Larva X 2-3S 2.5inch Brushless FPV Racing Drone 100mm Wheelbase Crazybee F4 PRO V3.0 AIO Flight Controller Camera Angle Adjustable 25mw~200mw VTX 

Notes: Because Emax can’t provide Avan rush propellers in time, so we will send the LarvaX with HQPROP T2.5*2.5*3 propellers and EMAX Avan rush propellers randomly

Shipped about 10 days after ordering

Specifications:

Brand Name: Happymodel 
Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
Wheelbase: 100mm
Size: 88mm*88mm*45mm(without propellers)
Weight: 50g(without battery)
Recommended Battery:

3S 300mah/350mah  2S 450mah

Features:
New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible

Powerful and smoothly
Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles
Camera Angle adjustable
VTX power switchable 25mw~200mw
Smartaudio ready , change VTX bands, powers, channels via OSD
Receiver option : Frsky D8 ,Flysky , Specktrum ,Frsky RXSR ,TBS CRSF

Diamond VTX Ready
Compatible both for 2s-3s Lipo/LIHV
 
Package includes:

Item Name

Qty

Larva X frame

1

Receiver Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky D8 NON-EU RX

1

Receiver Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky RX

Receiver Option3: Crazybee F4FS V3.0 PRO FC with DSM2/DSMX RX

Receiver Option4: Crazybee F4 V3.0 with external Frsky RXSR receiver

Receiver Option5: Crazybee F4 V3.0 with external TBS Crossfire Nano RX

1103 KV7000 motor

4

Micro Avan rush propeller 2.5inch(4cw+4ccw)  

1

Camera : Runcam Nano2

1

VTX: 5.8g 25mw~200mw switchable with 720p DVR (Diamond_vtx)

Propeller disassemble tool

1

Screwdriver

1

Spare parts specifications:

Motor

Mode: EX1103
KV options: KV7000
Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):3.7g

Flight controller

(Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
No RX version need to add external Receiver
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection

Onboard 4in1 ESC

MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_5.HEX
Default protocol: DSHOT600

Internal Frsky NON-EU receiver Version

SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non EU transmitter both D8 and D16 mode
Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m

Internal Flysky receiver Version

SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
Failsafe support

External TBS Crossfire version

CRSF Protocol , Official TBS transmitter compatible

External DSMX version

Frequency range: 2.403-2.479Ghz
Input power: 3.3V -- 5V
Response time: 22ms / 11ms
Resolution: 1024/2048
Display method: LED
Operating voltage: 3.3V
Working current: 60MA
Size: 18mm*13mm*5mm
Weight: 0.9 g
Antenna length: 30mm
Data format: Serial port
Protocol: DSM2/DSMX
Distance: no ground interference (1 m from the ground ) > 300m

External Frsky RXSR version

Weight: 1.5g

Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)

Operating Voltage Range: 3.5V~10V

Operating Current:70mA@5V

Firmware Upgradable

Compatibility: FrSky X Series modules and radios in D16 mode 

Could support Frsky New ACCST Protocol ( Upgrade firmware)

Diamond_VTX

Output power: 25~200mw switchable

Frequency: 40CH

Input voltage: 3.3V 5.5V

Current consumption: 250mA~510mA(type)

Antenna: RG178 antenna

U.FL interface

Frequency: 5.8GHz 5bands 40 channels

With Raceband

Smartaudio ready

Weight: 3g without antenna

Video Output Size: VGA (640x480)

Video Output format: NTSC

Record video size : 1280x720 @25FPS

TF Card support: Max.32G

Interface: JST SH1.0 3pin for Camera

        JST SH1.0 5pin for Connect with F3/F4 Flight controller

Compress Format: AVI

Runcam NANO2

Model: Nano 2

Image Sensor: 1/3" CMOS

Horizontal Resolution: 700TVL

Lens: 2.1mm(M8) FOV 155°

Signal System: NTSC / PAL

S/N Ratio: >50dB

Electronic Shutter Speed: Auto

Auto Gain Control (AGC): Auto

Min. Illumination: 0.01Lux@1.2F

D-WDR: Auto

Day/Night: Color

Power: DC 3-5.5V

Current : 110mA@5V 120mA@3.3V

Housing Material: ABS

Net Weight: 3.2g

Dimensions: L14mm*W14mm*H16mm

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
K
K.
AWESOME Micro Ripper - Get one!!!

This little ripper is fantastic. Great fun for a great price.

Tune is pretty good out of the box - video is on stock tune and 3S 450/550... this little guys rocks.

Here is my maiden on this one.... check it out and subscribe to see more.

https://www.youtube.com/watch?v=tO5qCc6tyu0

Y
Y.L.
Larva X

The quad came on time and was well packed. The FPV antenna was missing but that is not Qwinout's fault.


We Also Recommend