Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter iA6 Receiver Mode 2/1 Radio System *1
IMAX RC B3 Pro Compact Balance Charger *1
11.1V 4400MAH 30C 3S1P xt60 Plug *1
Lipo Battery Voltage Tester Volt Meter Indicator Checker Dual Speaker 1S-8S Low Voltage Buzzer Alarm *1
Frame Kit Specifications:
Tripod height: 250mm
Maximum available paddle:15 inch
Upper and lower center plate middle height:36mm
Pix 2.4.8 Spacifications :
Open source products, once sold, no return, if quality problems, Please return for repair . Does not provide one to one support. Buy carefully!
If you are using a PWM receiver, please ready a PWM / PPM converter.
Description: - The board integrates with PX4FMU+PX4IO - Pixhawk is with new 32 bit chip and sensor technology
Features: - Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system; - 14* PWM/ actuator output; - Bus interface (UART, I2C, SPI, CAN); - Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control; - Provide automatic and manual mode; - Provide redundant power input and fault transfer function; - Color LED lamp; - Multi tone buzzer interface; - Micro SD to record flight data;
Processor: - 32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit - Main frequency: 256K, 168MHZ RAM - 32 bit STM32F103 backup co processor