Main control chip: STM32F405RGT6
Barometer: none (reservation pad)
Input voltage: 2-6S
I2C interface: support
BEC-1: 5V / 2A (internal power supply, receiver, LED, BUZZER, etc.)
BEC-2: 8V / 3A (camera and picture transmission power supply)
Serial control port: three channels (UART1, UART3, UART6)
Flight control firmware: Betaflight
Conversion of hole position and damping ball hole position: 30.5 * 30.5mm, φ4mm
Flight control size: 36 * 36mm
Product name: 5144
Size: 5.1 * 4.4 inch 3 blades
Pitch: 4.4 inches
Wheel size: 5 mm
Center thickness: 7 mm
Blade diameter: 129.3 mm
Maximum blade width: 15.43mm
No-load current (11.1V): 1.6A
Motor resistance: 44mΩ (reference)
Maximum continuous current: 50A
Maximum continuous power: 750 watts
Outer diameter: 28 mm
Body length: 17.6 mm
Project Name: 35A BLheli_S 2-6S 4 in 1 ESC
Con. Current: 35A peak
Current (10s): 40A
Dimensions (PCB): 36x36mm
Hole size: 30.5x30.5mm
Input voltage: DC 7V-27V (2-6S)
Output voltage: DC 5V 2A
Power switching: five gears 25MW, 200MW, 400MW, 800MW, 1000MW
Signal channels: 40
Frequency switching: manual button / IRC OSD (simultaneous support)
Antenna interface: MMCX (distribution to SMA extension cable)
Dimensions: 36MM * 36MM
Hole distance: 30.5 * 30.5MM, M3
Lens: 2.1mm + ND filter
Image sensor: 1 / 1.8 "inch starlight HDR sensor
Horizontal resolution: 1200TVL
FOV: 180 degrees
Minimum delay: 8 ms
TV system: NTSC and PAL (can be changed)
Image: 16: 9 and 4: 3 (can be changed)
Video output: CVBS
Language: ENG / FRANCE / RUS / SPA / PU / KOREA / China / Japan
Day / Night: Auto / Color / Black and White / External
Size: 19mm * 19mm * 19mm
Wide power input: DC 5-40V
Recommended Parts(not included)
Receiver: Support SBUS, DSM, PPM, IBUS function receiver
1 Please do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to be unable to charge and become obsolete). After the battery is fully charged, it can not be charged for a long time.
2. Without understanding flight control and remote control, please do not modify any parameters and wiring without authorization.
3. Turn on the remote control before applying power to the aircraft, and unplug the power after the flight, and then turn off the remote control to prevent accidents.
4. This aircraft is recommended to fly indoors. When there is no wind, it can be flown in an open outdoor area. Avoid flying in crowds and surrounding areas with interference.
5. The product is unassembled / welded parts. If you have any technical and assembly problems, please feel free to contact us. We have a dedicated technical team to respond to related questions. If customers need to assemble, please contact us at any time, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
6. This product is not a toy and is not suitable for children under 14 years of age.
7. Please read the instructions carefully before any use, if you are a beginner, it is recommended to be assisted by experienced adults
8. Do n’t fly big and high because the plane is small.
9. Novices should be careful not to take the plane with their hands or let children take it to avoid being scratched when the plane is turning.
10. Please turn off the start switch in time when the aircraft falls on the wall or hits other objects during flight. Otherwise, it may cause damage to the flight control motor, etc.