Manual for Happymodel 5.8G Diamond_vtx

 Manual for Happymodel 5.8G Diamond_vtx

 Download 

https://cdn.shopify.com/s/files/1/0070/9473/0823/files/Diamond-VTX-built-in-DVR-manual.pdf?575

Firmware update steps:
1. Download the firmware and Extract the “CRESFW.BIN” to an empty TF-SD card

2. Insert the TF-SD card to the slot of the Diamond_vtx ,then powering the Diamond_vtx

3.The Red LED will starting to blinking ,that means the firmware is in updating

4. When the Red LED turned off ,it means update successfully , then disconnect the power immediately once finished

5.Remember to delete the “CRESFW.BIN” after update successfully

Note: Don’t rename the firmware when copy to the TF-Card and Don’t disconnect the power while firmware updating .