F220 220mm 5inch PNP RTF FPV Racing Drone with Razer Micro 1200TVL Camera 60mm RP-SMA Antenna 5.8G 40CH FPV Goggles Monitor

W-FPV Racing Drone with White color 3D Printed Kit

O-FPV Racing Drone with Orange color 3D Printed Kit

Precautions:

1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to be charged and become obsolete). After the battery is fully charged, the battery should be cut off in time and cannot be charged for a long time. .

2. Do not modify any parameters and wiring without knowing the flight control and remote control.

3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.

4. This product is not a toy and is not suitable for children under 14 years of age.

5. If you are a beginner, it is recommended to be assisted by an experienced adult

6. Novices should pay attention to not holding the airplane by hand when the airplane is turning, and don't let children touch it. Prevent being scratched.

7. Please turn off the start switch in time when the aircraft falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor. Check whether the aircraft is damaged, whether the screws are loose, and wait until everything is normal before taking off again.

Functions and features:

220mm wheelbase

Built-in OSD Betaflight

Support BLHeliSuit configuration

Support voltage 3-4S

7-10 minutes of flight time

Remote control distance (with FLYSKY remote control) about 400 meters

Paddle:

Model: 5043

Pitch: 4.3 inches

Material: PC

Weight/G: 4.63G

Inner diameter of center hole: 5mm

Paddle diameter: 13.5mm

Center thickness: 7mm

ESC:

Working voltage: 2-6S

Maximum continuous working current: 45A

Maximum instantaneous working current: 50A

Support communication modes: DShot150/300/600, PWM, Oneshot125, Oneshot42 and Multshot

Firmware version: BL16.7

Installation hole distance: 20 * 20mm / 30.5 * 30.5mm

Product size: 44 * 44 * 5.5

Packing size in mm: 62 * 58 * 18 mm

Product net weight: 13.6 grams

Package weight: 27 grams

Image transmission:

Weight: 12g

Input voltage range: 7-24V

Frequency: 48CH

Output power: 0mW / 25mW / 100mW / 200mW / 400mW / 600mW switchable

Transmission distance: ≥0.5km25mW, ≥1km200mW, ≥2km600mW

Installation size: 30.5*30.5mm

Motor:

Size: 2205

Stator diameter: 22 mm

Stator height: 5 mm

Motor KV: 2300

Weight: 29g

Support voltage: 3~4S

Flight control:

Name: F4 V2

Size: 36x36mm

Mounting hole: 30.5x30.5mm

STM32 F405 MCU can shorten the cycle time.

Support SBUS / PPM / IBUS receiver mode

Built-in power module BEC

camera:

Sensor: CMOS 1/3

Lens: 1.8mm

Video format: PAL/NTSC switchable

Resolution: 1200TVL

Input voltage: DC4.5V-25V

Weight: 4.5g

Size: 19x18.7mm(W*L)

White balance: automatic

WDR: 90db

Receiver version:

FRSKY version, FLYSKY version, without receiving version

Q&A:

Please refer to our pictures to choose the desired combination. If you have any questions, please feel free to contact us.