Happymodel Mobula6 1S 65mm Brushless Bwhoop Mini FPV Indoor Racer RTF with I6 Remote Crazybee F4 Lite Flight Control Batteries

Happymodel

Regular price $145.70

Shipping calculated at checkout.

Happymodel Mobula6 1S 65mm Brushless Whoop Drone Mobula 6 BNF AIO 4IN1 Crazybee F4 Lite Flight Controller Built-in 5.8G VTX with I6 Remote control Transmitter

Features:

AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX

Extreme light 1S 65mm Brushless whoop only 20g

Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera

Smooth and powerful

Compatible for 1S Lipo/LIHV

Camera Angle adjustable

Specifications:

Brand Name: Happymodel

Item Name: Mobula6 1S 65mm Brushless whoop drone RTF version
Wheelbase: 65mm
Size: 80mm*80mm*37mm

Weight: 20g

Receiver option:

Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter)

Motor speed option:

SE0802 KV25000(Race Edition)

SE0802 KV19000(Regular Edition)

Package includes:

Item Name	Qty
Mobula6 1S 65mm whoop Drone Frame	1
	1
SPI Receiver Option2: Crazybee F4 Lite FC built-in Flysky SPI RX	1
SE0802 KV19000 or KV25000 brushless motor	4
Gemfan 1219-3 Propellers(4cw+4ccw)	1
Runcam Nano3 1/3 CMOS 800TVL camera	1
5.8G 25mw 40ch vtx (Flight controller built-in)	1
1S 300mah 30C LiHV Battery	4
1S Lipo/LIHV USB Charger	1
Propeller disassemble tool	1

i6 remote controller 1

Spare parts specifications:

Motor	Mode: SE0802 19000KV or KV25000 Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.Len):Φ10.5mm14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only
Propellers	Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.28g
Flight controller	(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600

OnboardFlysky SPIreceiver Version	SPI BUS receiver Protocol: AFHDS and AFHDS-2A Switchable Channels: 8ch(AFHDS) or 14ch(AFHDS-2A) No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m Failsafe support
Onboard 5.8g VTX	Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready
Runcam Nano3	Model: RunCam Nano 3 Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens : 2.1mm(M8) FOV 160° Signal System: PAL/NTSC Non Switchable S/N Ratio: >50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V 120mA@3.3V Housing Material: ABS Net Weight: 1.2g Dimensions: L14mmW14mmH9mm
Lipo Battery	Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Size: 57mmx12mmx7mm Weight: 8g Connector: PH2.0

FS-I6 Transmitter Specifications:

Channels: 6

Model type: fixed-wing/glider/helicopter

RF range: 2.405-2.475GHz

Bandwidth: 500KHz

Band: 142

RF power: less than 20dBm

2.4G system: AFHDS 2A and AFHDS

Code type: GFSK

Sensitivity: 1024

Low voltage warning: less than 4.2V

DSC port: PS2; output: PPM

Charger port: no

ANT length: 26mm * 2(dual antenna)

Power: 6V 1.5AA * 4 (Not included)

Display mode: Transflective STN positive type,

128 * 64 dot matrix VA72 * 39mm, white backlight.

Online update: yes