Happymodel 1.2G 1.3G VTX 1.6w 8CH FPV Video transmitter module 1.2G Y-shaped Antenna 1600mw For DIY Drone

Specifications:

Product parameters

Input voltage：7-30V

Working frequency：1.2G-1.3G

Available channels：9-CH

Maximum output power：1600mwWMaximum size：37mm*31mm*11mm

Mounting hole：20mm*20mm by M2 screw

Weight：18.8g

Number of channels：8CH

Frequency：1120/1160/1200/1240/1258/1280/1320/1360(MHz)

Output power：PIT/25MW/200MW/1600MW

S/N(Fo±3MHz)：>70dBc

Antenna Port： 50 Ohms

Input format： NTSC or PAL

Operating Temperature： -10℃~+60℃

Function Description：

1. Power value could controlled by IRC TRAM Protocol "PIT/25/200/1600MW"

2. Press and hold the Band/Channel switch button for 1 second to switch CH 1-8 cycle.

3. Press and hold the Power level switch button for 1 second to switch the power to PIT/25mw/200mw/1600mw cycleS.

4. Once the VTX data wire was connected to betaflight flight controller TX and IRC TRAMP was correctly set， then the Bands/channels/power value can only be controlled by betaflight configurator or OSD menu.

Known issue：

LED indicate on the VTX will not change while switch bands/channel or power value by IRC TRAMP， however the value of bands/channels/power value will really be changed .When using this product， please comply with local regulations and install the antenna before use

Packing list：

1x1.2G 1.6W Video transmitter module

1x video transmitter module cable

1xMMCX-SMA female adapter cable

1x1.2G Y-shaped antenna