Jumper R8 R1F R1 V2 16CH PWM SBUS RC Receiver For FrSky T16 Plus Pro Series Radio D16 D8 Mode for PIX PX4 APM Flight Control

Jumper

Regular price $19.40

Shipping calculated at checkout.

Quantity

R8 receiver Details :

The R8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data (TX, RX) to the remote control of the world, and can display the flight control data to the remote control through the APM script!

Since then, don’t have to install additional converters for getting data back from PIX, PX4.

The items(R8 was updated,Pls know that It is now Dual antenna and The measured distance increased from 2km to 5km)

Specifition:

Number of channels: 8ch (PWM) / 16ch (SBUS)

RSSI (Signal Strength Indication) output: PWM

Operating voltage range: 4.0~8.4V

Operating current range: 100mA@5V

Effective distance: full distance (>2.0km)

Compatibility:

D8 mode

D16 mode

Features:

- More channels: 1-8 channels from traditional channel output, 1-16 channels from SBUS port

- RSSI output: analog voltage output (03.3V)

- Two-way full duplex transmission (Telemetry)

Weight: 10g

With RSSI output: analog voltage output (03.3V)

Pair code method:

1. Press the bind button on the receiver, red/green LED solid on

2. On radio side, select Frsky D16 protocol (T12/T16: Multi Frsky D16);

3.When Red LED is flashing, binding succeeded.

4. After binding, withdraw the binding mode and power up the receiver again. Green Led turns solid on.

LED color description.

(The green light is always on: the signal is good; the green light is blinking: the signal is bad; the red light is always on: the signal is lost)

Jumper R1 receiver Details :

It is compatible with all devices using the Frisky D16 mode, with integrated redundancy, telemetry and smart port enable, and the IPEX connector makes it easier to replace the antenna.
Technical Parameters:
Number of channels: 16ch (SBUS)
RSSI (Signal Strength Indication) output: 0-3.3v
Data return: S.port
Operating voltage range: 4.0~6V
Operating current range: 80mA@5V
Effective distance: full distance (>1.5km)
Compatibility: D16 mode FrSky Taranis D16 Mode
Volume: 20*15*4mm (without antenna)
Weight: <2g

Bind mode:
Press and hold the receiver's frequency button, turn on the power, the red and green lights are always on, and the receiver enters the frequency mode. The remote control turns on the frequency.
The receiver is successfully paired and the green light flashes slowly. The remote control exits the frequency, the receiver is powered back on, and the green light is on. When the receiver loses its signal, the red light is on.

Item: Jumper R1 V2 Mini 2.4GHz 16CH Receiver
Parameters:
Brand Name: Jumper
Item Name: R1 V2 Mini RC Receiver
Model: R1 V2 Mini
Dimension: 17.2*8.8*4.5mm (L x W x H)
Weight: 1.5g
Number of Channels: 16Ch
Operating Voltage Range: 3.5V-6V
Operating Current: 60mA@5V
Operating Range: Full range
Distance: >2KM
Compatibility: radios in D16 mode
Features:
Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module . A transmitter internal or external RF module can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure.

- Put the transmitter/transmitter RF module into binding mode

- Connect battery to the receiver while holding the F/S button (hold for more than 6 seconds) on the receiver to enter the binding mode (red and green LEDs constant on). Press "bind" on the transmitter, the RED LED flashing indicates binding successfully. Reboot the receiver and go back to normal Mode of transmitter RF. Green LED constant on indicates linking normally.

Package Included:
1 x R1 V2 Mini RC Receiver
1 x Manual

Jumper R8 R1F R1 V2 16CH PWM SBUS RC Receiver For FrSky T16 Plus Pro Series Radio D16 D8 Mode for PIX PX4 APM Flight Control

Customer Reviews