BETAFPV AIO P1 HD VTX Matrix 1S Flight Controller 1/2.9'' CMOS Camera For Meteor75 Pro II / Meteor65 Pro II Toy Airplane

BETAFPV AIO P1 HD VTX Matrix 1S Flight Controller 1/2.9'' CMOS Camera For Meteor75 Pro II / Meteor65 Pro II Toy Airplane

Package Inlcudes:

1 * Matrix 1S Brushless Flight Controller (AIO P1 HD VTX)

1 * Type C Adapter

1 * SH1.0-4Pin Adapter Cable

1 * 5.8G Antenna

4 * M1.2*4 Self-tapping Screws

4 * M1.4*5 Self-tapping Screws

4 * H1.2mm Shock Absorbing Balls

1 * User Manual

Recommended Parts:

VRX: P1 HD VRX (Nano)

Camera: Air HD Camera

Goggles: VR04 HD

Whoops: Air65 II, Air75 II, Meteor75 Pro II, Meteor65 Pro II

Frame: Meteor75 Pro II, Meteor65 Pro II, Air75 II, Air65 II, Air65 Champion Frame

Motors: 1102 Motors, 0802 Motors, 0702 Motors

Canopy: Air II Canopy

How to Use Serial Ports, Intergrated RX and VTX:

Please note that by default, UART3 is connected to the RX and UART4 is connected to the HD VTX. Additionally, this FC reserves 1 complete full-featured serial ports that can be used for external CRSF/SBUS receivers, GPS, or other serial devices.

VTX :

VTX: P1 Air Unit

Frequency: 5.1GHz-5.9GHz

Power: 200mW

Transmission Resolution: 1080p@60fps

Video Transmission Latency: about 60ms

Camera :

CMOS: 1/2.9''

Resolution: 200 DPI

FOV: 153°

Aspect Ratio: 16:9

S/N Ratio: 41.5dB

Port: DF36-15

Coaxial Cable Length: 50mm

Size: 11.9 x 11.8 x 14.2mm

Weight: about 2g

Flight Control :

MCU: STM32G473CEU6

Gyro: 3.2kHz

Blackbox Memory: 16MB

Sensor: Voltage & Current

BEC: 5V, Max 3A

UART: UART 2, UART 3 (For RX), UART 4 (For HD VTX)

BetaFlight OSD: /

ESC: 1S, 12A continuous

RX: Serial ELRS 2.4GHz (V3.5.3)

VTX: Onboard P1 Air Unit

USB port: SH1.0-4Pin

Motor connector: JST1.25 (gold-plated)

Battery connector: BT2.0

Size: 30.5 x 30.5mm

Weight: 5g

Mounting Hole: 25.5x25.5mm

Board Thickness: 1.0mm

Reciver :

RX: Serial ExpressLRS 2.4GHz

Antenna: Copper wire 31mm length

Firmware target: BETAFPV 2.4G AIO V2 RX

Telemetry Output Power: <12dBm

for Flash Firmware via WIFI: Support

ESC :

Power Input: 1S

Current: 12A continuous, 18A peak

Digital Signal Protocol: DShot300, DShot600