Packing list:
2pcs props(cw and ccw)
1pcs esc
1pcs motor
- KV: 1000
- Max Efficiency: 80%
- Max Efficiency Current: 4-10A (>75%)
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: ?27.5 x 30mm
- Shaft Diameter: ?3.17mm
- Weight: 47g
Including: 1 set 2212 1000KV Brushless Outrunner Motor with Mounts
Name: 10" X 4.5 " 1045+1045R Blade Propeller
For:RC 4-axis X - axis KK MK Multicopter copter Aircraft UFO
Quantity: 1Pair
100% brand new
Diameter: 10 "(25.4 cm)
Slope: 4.5 "(11.43 cm)
1045 x1
1045R x1
Bore: approximately 3MM 4MM 5MM 6MM 7.8MM (come with the prop shaft washer,you can use for different shaft)
ATTENTION:
- This ESC do not have the English instruction.
- Before producing, the manufacturer have set up the program, the ESC do not need additional program.
1.1 Output: Continuous 30A, Burst 35A up to 10 Secs.
1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.
1.3 BEC: 2A / 5V (Linear mode).
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
1.5 Size: 45mm (L) * 24mm (W) * 11mm (H). 1.6 Weight: 22g.
2.1 Safety Arming Feature:
Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration:
Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to their default settings.
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.
3 Advantages
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.