Bassline 2inch frame and canopy

1

Flight controller Option1: X12 Lite V1.0 flight controller built-in SPI ELRS 2.4G receiver

1

Flight controller Option2: CrazyF411 ELRS built-in UART ELRS 2.4G receiver

EX1103KV11000 brushless motor

4

Gemfan toothpick 2023tri-blade propellers(4cw+4ccw)

1

Walksnail Avatar HD mini 1s lite kit

1

HDZero Whoop Lite and nano lite bundle

Canopy for 14mmx14mm camera

1

Screw driver

1

Propellers

Weight:0.88g

Material: PC

Pitch:2.3inch

Props Dia:52.17mm

Center Thickness:5mm

Center Hole Dia:1.5mm

Flight controller

X12 Lite flight controller built-in SPI ELRS 2.4G receiver Target: CRAZYBEEF4SX1280

CrazyF411 ELRSflight controller built-in UART ELRS 2.4G receiver  Target: CRAZYBEEF4DX

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor:BMI270 orICM42688P(SPI connection)

Power supply:2S 6.5v~8.7v

Built-in 12A(each) Blheli_S 4in1 ESC(X12 Lite)

Built-in 20A(each)Blheli_S 4in1 ESC(CrazyF411 ELRS and Crazyf411 FRSKY)

Built-in Betaflight OSD(SPI Control)

Built-in SPI ExpressLRS 2.4G, UART ExpressLRSor SPI FRSKY D8/D16

Built-in voltage detection

Built-in current sensor

X12 Lite AIO Built-in Onboard 4in1 ESC

Power supply: 1-2S LiPo/LiPo HV

Current: 12A continuous peak 15A (3 seconds)

Support BLHeliSuite programmable

Default Factory firmware: Bluejay 0.16

Firmware target:Z_H_30_48_v0.16

Default protocol: DSHOT300

CrazyF411 ELRSand FRSKY AIO  Built-in Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 2-4S LiPo/LiPo HV (7v/17v)

Currents: 20A continuous peak 25A (5 seconds)

Support BLHeliSuite programmable

Default Factory firmware: Bluejay 0.18

Firmware target:F_H_40_48_v0.18

Default protocol: DSHOT300

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0

RF Frequency: 2.4GHz

Antenna : SMD antenna

Telemetry output Power: <12dBm

Receiver protocol:  SPI ExpressLRS

Default Compatible with ExpressLRS V2.0 TX Module

Couldn’t flash separately ExpressLRS firmware

Could flash FC firmware to support ExpressLRS v3.0 TX module

Onboard UART ELRS receiver Version

Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz

RF Frequency: 2.4GHz

Antenna plug: IPEX

Telemetry output Power: <12dBm

Receiver protocol:  CRSF

Default firmware version: ExpressLRS V3.0.1

HDZERO Version

HDZero Nano Lite Camera

14x16x11 mm

1.5gram

0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor

Excellent low light performance

Fov:

4:3: D:130° H:108° v:84°

16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX

1-3S Input

25mW/200mW RF Output-SmartAudio Support

25.5x25.5 M2 Soft Mounting- Antenna Retention

Removable Shielding Box- 32.5x32.5mm(29x29mm inner)

4.5grams/4mm Thickness (without shielding)

Walksnail Version

Camera

Model    Avatar lite camera

Image Sensor 1/2.7”1nch

Resolution   1080P/60fps,720P/120fps,720P/60fps

Ratio       16/9  4/3

Lens 2.1mm

FOV     170°

Aperture     F2.0

Shutter Rolling Rolling shutter

Min.Illumination   0.001Lux

Weight 1.8g

Dimensions 14*14*16mm

VTX

Model Avatar mini 1s module

Communication Frequency 5.725-5.850GHz

Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm;

MIC:<25dBm

I/O Interface JST1.0*6(Power in)JST0.8*4(USB)

Mounting Holes 25.5*25.5mm

Dimensions 30*30*6.5mm

Storage 8G

Recording 1080p/720p

Weight 5.1g

Operating Temperature -20-40℃

Channels 8

Wide Power Input 3.1V-5V

Supported FC System Betaflight

OSD Canvas mode

Bitrate 25mbps 50mbps

Latency Average delay 22ms

Antenna IPEX