Professional RC Hobby Drone Store, Keep on Updating……
Log in Sign up
Cart (0)
Happymodel Moblite7 HDZERO 1S 75mm Digital HD Brushless 1002 KV20000 Bwhoop V3 SuperX HD ELRS AIO Flight Controller Motors Drone

Happymodel Moblite7 HDZERO 1S 75mm Digital HD Brushless 1002 KV20000 Bwhoop V3 SuperX HD ELRS AIO Flight Controller Motors Drone

Happymodel

$292.26

Shipping calculated at checkout.

 

Notes: Recommend use the battery with lead wire, both A30 and BT2.0 plug battery are compatible. 
 

Specifications:
Brand Name: Happymodel
Model: Moblite7 HDZERO V3
Frame wheelbase: 75mm
Weight: 31.5 gram without battery
Size: 98mm*98mm*50mm
UART ELRS v3.0 ready
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: GNB A30
Onboard blackbox ready

 

Package includes:

 

Item Name

Qty

Mobula7 v4 75mm frame +Canopy

1

SuperX HD ELRS AIO flight controller

1

Happymodel 1002 KV20000 Unibell brushless motor

4

Gemfan 1610-2 bi-blades propeller(4cw+4ccw)

1

HDZero Nano Lite Camera

1

HDZero Whoop Lite VTX

1

Spare Canopy

1

Propeller disassemble tool

1

Screw driver

1

 

Flight controller

 

SuperX HD ELRS

Betaflight 4.4.2 firmware ready
Firmware target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHz, 512K FLASH)
Sensor: BMI270 or ICM42688P (SPI connection)
Power supply: 1-2S Lipo Lihv battery input (DC 2.8V~8.7V), only support 1s input for this drone
Built-in 12A(each) Blheli_S 4in1 ESC Dshot300 read
Built-in UART elrs receiver , elrs v3.0 ready, support WIFI and pass-through firmware update
Bluejay ESC Firmware ready
Built-in 5V 1A BEC
Built-in voltage detection
No betaflight analog osd chip

Onboard 4in1 ESC

Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous peak 15A (3 seconds)
Support ESC-Configurator and BLHELI_S Suite configurator
Factory firmware: Z-H-30 – Bluejay, 0.19, 48kHz
Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

RF Frequency: 2.4GHz
Antenna: enameled copper wire 31mm length
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
The same hardware with Happymodel EP1 receiver
Could update firmware via ExpressLRS configurator or WIFI or Betaflight pass-through

Motor

Model: EX1002 20000KV
Configu-ration:9N12P
Stator Diameter:10mm
Stator Length:2mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ13.5mm*12.5mm
Weight(g):2.5g
No.of Cells(Lipo):1S only

Propeller Gemfan 1610-2 Bi-blades

Weight:0.24g
Material: PC
Pitch:1 inch
Props Dia:40mm
Center Hole Dia:1.5mm

HDZero Nano Lite Camera

14x16x11 mm
1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Excellent low light performance
Fov:
4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°

HDZero Whoop Lite VTX

1S Input
25mW/200mW RF Output-SmartAudio Support
25.5×25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5×32.5mm(29x29mm inner)
4.5grams/4mm Thickness (without shielding)

Default factory dump file:
Moblite7 HDZERO 1S 75mm digital HD brushless whoop v3 dump file

Port setting:

 

 

 

 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)