Note:there are V1 and V2 different versions, pls choose which one you like.

HDZero Freestyle V2 Kit Description

The HDZero Freestyle V2 VTX is our 2nd generation 5.8GHz digital video transmitter which can be fitted into most 3-5-inch HD drones. All sockets are well protected by the CNC case that provides durability, RF shielding and improved signal integrity. A wire harness is included for solderless connection for power and MSP UART port. The antenna and MIPI cable are secured by the included retention bar and screws.

The VTX supports 720p60 ,1080p30, 540p60 and 540p90 video modes.

The VTX is capable of maximum 1W RF output at R1 channel if unlocked with license or approval from the local authorities.

Specifications

Includes

1x Freestyle V2 VTX

1x Nano 90 Camera (with 19 x 19 Mount)

1x HDZero RHCP antenna

1x 120mm Mipi Cable

1x Power Cable

1x SA Cable

1x Plastic bar for Mipi Cable with 3 x screws (M1.4 x 2mm).

1x Plastic bar for U.FL with 3 x screws (M1.4 x 8mm)

1x Double Sided Tape (29 x 30 x 1mm )

V1 VTX Description

The HDZero Freestyle VTX is a digital HD 720p 60fps video transmitter capable of delivering up to 1000mw on 5.8GHz. It works with the HDZero/Shark Byte goggle module to transmit video, and with a remote controller to wirelessly control the parameters for the transmitter and camera.

The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHZ video transmitter.

The power input range is 2S –4S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad.

The VTX includes a BEC that converts 2S-6S to fixed 5.8V with maximum 5A output current. The VTX also includes an U.FL RHCP antenna.The HDZero Freestyle VTX is a digital HD 720p 60fps 5.8GHZ video transmitter.The power input range is 2S –4S. Though the VTX integrates a surge protection circuit, a large capacitor (450+uF) parallel with battery leads is mandatory to smooth the power supply of the whole quad. The VTX includes a BEC that converts 2S-6S to fixed 5.8V with maximum 5A output current. The VTX also includes an U.FL RHCP antenna.

Specifications

Includes

HDZero Freestyle VTX * 1;

HDZero RHCP Antenna * 1;

Power/ Uart Cables * 1；

u.FL Antenna Retention Screws * 2/Plate * 1

MIPI Retention Screws * 2/Plate * 1

Important Notes:

The Freestyle VTX consumes up to 15W. If it is connected with FC, make sure the FC has enough current. For example, the FC has 10V, it needs minimum 1.5A current output.

Removing the heat sink is not recommended because it is part of the design.