There're many options,please select the RC Drone Kit you need according to the picture and the below table, thank you!
Precautions:
1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to be charged and become obsolete). After the battery is fully charged, the battery should be cut off in time and cannot be charged for a long time. .
2. Do not modify any parameters and wiring without knowing the flight control and remote control.
3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.
4. This product is not a toy and is not suitable for children under 14 years of age.
5. If you are a beginner, it is recommended to be assisted by an experienced adult
6. Novices should pay attention to not holding the airplane by hand when the airplane is turning, and don't let children touch it. Prevent being scratched.
7. Please turn off the start switch in time when the aircraft falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor. Check whether the aircraft is damaged, whether the screws are loose, and wait until everything is normal before taking off again.
Functions and features:
215mm wheelbase
Built-in OSD Betaflight
Support BLHeliSuit configuration
Support voltage 3-4S
7-10 minutes of battery life
Remote control distance (about 400 meters with FLYSKY remote control) (about 2000 meters with T-lite remote control)
Paddle:
Model: 5043
Pitch: 4.3 inches
Material: PC
Weight/G: 4.63G
Inner diameter of center hole: 5mm
Paddle diameter: 13.5mm
Center thickness: 7mm
ESC:
Working voltage: 2-6S
Maximum continuous working current: 45A
Maximum instantaneous working current: 50A
Support communication modes: DShot150/300/600, PWM, Oneshot125, Oneshot42 and Multshot
Firmware version: BL16.7
Installation hole distance: 20 * 20mm / 30.5 * 30.5mm
Product size: 44 * 44 * 5.5
Packing size in mm: 62 * 58 * 18 mm
Product net weight: 13.6 grams
Package weight: 27 grams
Image transmission:
Weight: 12g
Input voltage range: 7-24V
Frequency: 48CH
Output power: 0mW / 25mW / 100mW / 200mW / 400mW / 600mW switchable
Transmission distance: ≥0.5km25mW, ≥1km200mW, ≥2km600mW
Installation size: 30.5*30.5mm
2205 motor or 2306 motor:
2205 motor
Size: 2205
Stator diameter: 22 mm
Stator height: 5 mm
Motor KV: 2300
Weight: 29g
Support voltage: 3~4S
2306 motor
Stator diameter: 23 mm
Stator thickness: 6 mm
Number of stator arms: 12 pieces
Number of stator poles: 14
Motor KV: 2400
Maximum continuous power: 750 watts
Weight: 32 grams
Outer diameter: 28 mm
Support voltage: 3~4S
Flight control:
Name: F4 V2
Size: 36x36mm
Mounting hole: 30.5x30.5mm
STM32 F405 MCU can shorten the cycle time.
Support SBUS / PPM / IBUS receiver mode
Built-in power module BEC
Razer camera or ratel 2 camera:
razer camera
Sensor: CMOS 1/3
Lens: 1.8mm
Video format: PAL/NTSC switchable
Resolution: 1200TVL
Input voltage: DC4.5V-25V
Weight: 4.5g
Size: 19*18.7mm(W*L)
White balance: automatic
WDR: 90db
ratel 2 camera
Sensor: CMOS 1/1.8
Lens: 2.1mm
Video format: PAL/NTSC switchable
Resolution: 1200TVL
Input voltage: 5V-40V
Weight: 5.9g
Size: 19*19*20mm
White balance: automatic
Receiver version:
FRSKY version, FLYSKY version, without receiving version
Q&A:
Please refer to our pictures to choose the desired combination, all parts are sold separately in our shop, and you can add them as spares. If you have any questions, please feel free to contact us.