QWinOut Mark4 7inch Quadcopter Frame Kit 3K Carbon Fiber 295MM Wheelbase Support 2806 Motor for Diy Racing Drone

Product parameters

MAK 7-inch product specifications

Maximum propeller: 7 inches

WHEELBASE: 295MM

SIZE: 193*223MM

Weight: 128g

BOTTOM PLATE THICKNESS: 2.5MM

TOP PLATE THICKNESS: 2.5MM

SPLINT THICKNESS: 2MM

ARM THICKNESS: 5MM

PROTECTIVE FRAME THICKNESS: 2MM

 

Recommend parts

Recommended Specifications (not included)

Flight controller: F4 F722

ESC: 40A~65A

Motor: 2806 2806.5 2807

Propeller: 7040 7035 (7 inches)

Battery: 5S 2200mAh~6S5200mAh

Camera: CADDX Foxeer II Razer

Features of the MAK 4 series products:

1. MAK 4 fancy rack, lighter and better performance for more convenient installation.

2. Smooth flight, FPV shooting is easier and more elegant.

3. The H-shaped structure does not affect the flight experience at all, but compared with the X-shaped structure, the arm is shorter, lighter in weight, and the arm strength is higher

4. The layout of the H-type has more installation space in the middle section of the cabin, the center of gravity is also lower, and the flight is more stable.

5. THE MOUNTING SIZE OF THE FPV LENS IS 19MM WIDTH, WHICH IS SUITABLE FOR MICRO LENSES, SUCH AS THE FLATHEAD BROTHER II RAZER MICRO/TOOTHLESS MICRO

6. At the same time, the front and rear of the cabin are reserved for flight control installation positions with two hole spacings of 30.5*30.5 and 20*20, which are suitable for the installation of various flight control equipment.

7. FIXED MOTOR MOUNTING HOLE SPACING: 16*16/16*19/19*19MM ARE COMPATIBLE to ensure the strength of the frame.

8. The corners of the whole machine are chamfered, the workmanship is fine, the structure is reasonable, and of course, there are customized thickened aluminum tubes to ensure the strength of the frame.