QWinOut A2212 1000KV Brushless Outrunner Motor 13T + 30A Speed Controller ESC + 3.5mm Banana Connectors for DIY RC Drone Aircraft KK 4 Axle Copter UFO Hexacopter

A2212 1000KV Brushless Outrunner Motor + 2-4S 30A RC Brushless ESC

Feature:
Already solded with 3.5mm Male banana connectors, effectively avoid welding problems

Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; 210 360 450 Helicopter; 380 f450 f550 and other four-axis six-axis fixed-wing drone.

Advantages fo the ESC:
1. Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. 2. Extreme low resistance PCB is helpful for getting a super current endurance capability. 3. Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.



A2212 1000KV Brushless Motor
KV: 1000
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Package Including: 2212 1000KV Brushless Outrunner Motor with Mounts and solded with 3.5mm male banana plug


2-4S 30A Brushless ESC
NOTE: We have set up the program, the ESC do not need additional program.
Working current: 30A
Output: Continuous 25A, Burst 40A up to 10 Secs
Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC: 5V 3A
Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
Size: 45mm (L) * 25mm (W) * 11mm (H)
Weight: about 25g


Features
1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
3. Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: reset all the programmable items to their default settings.
4. Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.