QWinOut A2212 930KV Brushless Outrunner Motor 15T + 30A Speed Controller ESC ,RC Aircraft KK Copter UFO

A2212 930KV Brushless Outrunner Motor + 2-4S 30A RC Brushless ESC
Already solded with 3.5mm Male banana connectors, effectively avoid welding problems
Compatible for: DIY FPV KK MK MWC RC Quadcopter Hexacopter Multi-Rotor Aircraft; Helicopter; F330 X525 F450 S500 F550 S550 and other four-axis six-axis fixed-wing drone.

Advantages fo the ESC:
1. Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying. 
2. Extreme low resistance PCB is helpful for getting a super current endurance capability. 
3. Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.



A2212 930KV Brushless Motor

Brand: QWinOut

KV: 930rpm/V

Weight:  47g

Min Current:  4A

Max Current 10A

Max Efficiency: 80%

No. Of Cells: 2-3 Li-Poly

Motor Dimensions: ?27.5 x 30mm

Shaft Diameter: ?3.17mm


Each Pcs Including: A2212 930KV Brushless Outrunner Motor with Mounts and solded with 3.5mm male banana plug



2-4S 30A Brushless ESC

NOTE: We have set up the program, the ESC do not need additional program.

Working current: 30A

Output: Continuous 25A, Burst 40A up to 10 Secs

Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery BEC: 5V 3A

Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)

Size: 45mm (L) * 25mm (W) * 11mm (H)

Weight: about 25g



Features

1.Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.

2.Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.

3. Programmable Items: Brake Setting: brake enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing: low / medium / high. Reset: reset all the programmable items to their default settings.

4. Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.