APM is an open source flight control, can you play APM well depend on individual ability.
Player must have ability of basic understanding of monolithic integrated circuit, c-language, knowledge of electrical,mechanical, and also needs a certain degree of mental capacity, financialand material resources, energy support.If you're not ready, then We recommend that you prepare some introductory information first.
Introduction: Eliminate V2.52 Version Old 1.0mm 6P SM06B GPS interface , changed to the DF13-4P compass external I2C interface, Place the DF13-5P GPS interface with external interfaces of the compass, more convenient to connections GPS with external compass.
Replaced the V2.52 I2C interface to multi-purpose MUX interfaces, which can be used by the users themselves through the Pad of Back Board freely configurable function output, UART0,UART2,I2C,OSD optional, defaults OSD interface, avoiding 2.52 version when you want to use both Data Transmission and OSD, you need to use Y-line separating the interface programme.
Improved OSD interface when used in conjunction with Data Transmission, because of the isolation resistance, more effective to avoid the interference of Data Transmission.
New V2.8.0 use United States semi-LP2985-3.3, pressure-resistant up to 16V, increased reliability, reduced probability of Bad Gyro health due to voltage problems.
GPS with Compass
Radiolink AT9 2.4GHz 9 Channel Transmitter Radio & Receiver
1 Size: 183*193*100mm
2 Weight: 0.88kg
3 Frequency: 2.4GHz ISM band (2400MHz to 2485MHz)
4 Modulation mode: QPSK
5 Channel bandwidth: 5.0MHz
6 Spread spectrum: DSSS
7 Adjacent channel rejection: >38dbm
8 Transmitter power: <100mW(PCB testing), <20dbm(3 meter air testing)
9 Operating Current: <105mA
10 Operating Voltage: 7.4~15V
11 Control distance: more than 900 meters ground, 1.5kms air
12 Channel: 9 channels, 5~9 channels are customizable
13 Simulator model: under the simulator model the transmitter action turn off, change to power saving model
Specifications: Easy for install on the DJI F450 F550 or similar frame Come with 4pcs for one full set. Come with M3*8 Screws for assembling High(LxWxH): 140mm (Single) Weight: about 12g (Single)
Aluminum 2-axis Gimbal Camera Mount PTZ
Effective Picture,No Camera included,Purchase or ready separately:
Features: - Simple structure and light weight,CNC aluminum alloy structure - Brushless motor direct drive - With anti-vibration rubber balls,easy to adjust - Compatible with Gopro 3/3+, - with 2pcs 2208 motors and V3 gimbal controller,sensor - with motor protector which can help heat dissipation - gimbal weight: 400g
Note: This Product Not Suit For DJI Phantom Visitor 2.
And It Is Not The Mounting Holes, You Need To Drilled And Install By Yourself.