- Support KK MWC by new disign PCB board(Not Included)
Color: Red + White + Black
Shaft distance: 17.7in/450mm
- Net weight: 0.65lb/282g - by advanced engineering material,super strong & smooth
- Kit(need you assemble yourself)
KKMulticopter v5.5 Circuit board V2.3
A 2212 A2212 1000KV Brushless Outrunner Motor W/ Mount *4pcs
1. Simple structure, Easy to Maintain and Debug Control
2. Relying on potentiometer adjust gyro sensitivity.
3. Full servo signal output, support normal ESC / analog servo
4. Support for single-axle / UFO, Y3 3-axle, Y4-type 3-axle, 4 axle, 6 axle, V22 flight mode
5. Supports 4-axle "+" and "X" flight mode, support for six-axle "HEXA6" and "Y6" flight mode.
30A ESC Speed Controller *4 pcs
Specification: 1.1 Output: Continuous 30A, Burst 35A up to 10 Secs. 1.2Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery. 1.3BEC:2A / 5V (Linear mode). 1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.(BLM: BrushLess Motor) 1.5 Size: 45mm (L) * 24mm (W) * 11mm (H). 1.6 Weight:22g.
This Li-poly battery features high efficient and high discharge,use a inspection machine to match packs, suitable for All Align trex 450 rc heli and other professional model airplanes, cars, and guns.
Max Continuous Discharge: 10C, Burst Discharge: 15C. Normal operating temperature is approx. 40-65C(within 80% of rated discharge). Max. temperature: 80C. NOTE: When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can\'t exceed 80% of the max capacity after full charging to ensure a good cycle performance. Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage. Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35C in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.
Package include: HJ 450 450F Nylon Fiber Flamewheel Frame *1 A2212 1000KV Motor installed base*4 30A ESC*4 V2.3 Circuit board*1 Programmer Firmware Loader USB*1 1045 Propeller*2 pair 11.1V 2200mah 20c lipo battery *1 Relate wire Charger+adapter * 1 set (If you have request for the plug of the adapter,please leave message or contact us before purchase,or we will ship according to common sense,the charger and adapter\'s style sometimes is different from the picture shows,function same,if you mind,please contact us before purchase, it's my pleasure to serve you!)