The frame is made of 3K carbon fiber woven carbon fiber board and fully CNC machined. The whole rack weighs only 692 grams. Folding design, portable. The aerial pan/tilt installation method is front hanging or mid-position suspension. The battery is fixed on the upper or lower side. The user can use the upper or lower hanging fixed and high stand according to individual needs.
It is suitable for simple flight and aerial photography, aerial mapping, reconnaissance, fire observation, life exploration, cable inspection, farm monitoring, oil line inspection, high requirements on mobile performance, low equipment load and more need for air navigation.
1, 16mm carbon tube, high-strength center plate with distribution board installation position
2. The wheelbase is 510mm. The weight of the frame is about 692g. The maximum load is 2KG (the actual load depends on the power).
3, 2212, 2216, 3108, 3110, 3508, 3510, 4108 and other motors can be applied
4, recommended 10 inch -15 inch paddle
5, Lipo battery 3S -6S 2200mah-6000mah, etc. can be used
6, the internal reserved APM shock plate (F16122) mounting hole, suitable for APM2.5/2.6/2.8/PIXHAWK and other open source flight control, while reserved large space can be installed DJI, zero degree flight control