SoloGood 5.8G 40 channel FPV handheld screen 4.3 inches 800*480 Resolution DC5V/2A with Interface Antenna For Drone

Description

5.8G FPV handheld screen manual

DVR recording
 

Features:

Low power consumption

One-click automatic channel search

Can record anytime and anywhere

Dual antenna reception can make the signal more stable

4.3 inch 800*480 high-definition bright screen

Built-in super sensitive 5.8G 40 channel receiver

Built-in 3.7V/1200mAh high-capacity polymer lithium battery

Universal usb charging interface

Real-time video, low latency

Chinese and English bilingual menu

Support audio and video input

Expenditure audio output (headphones can be connected)

Support 5-23V wide voltage charging

 

Specification:

Model 5803D

Name: SoloGood  5.8G FPV handheld screen

LCD screen size: 4.3 inches

Resolution: 800*480

Display ratio: 16:9

Viewing angle: full screen

Brightness: 500cd/m2

Video delay: less than 20ms

Interface Antenna: 2*RP-SMA male hole

USB: charging cable

AV interface: external audio and video input or audio output

Card slot: Support C10 high speed TF card

DVR recording size: VGA/D1/HD (three modes are optional)

Video sound: on/off (optional)

Recording time: off/3 minutes/5 minutes/10 minutes (optional)

Frame rate: 30 frames

Compression format: MJPEG

Video file format: AVI
 

Languages: English and Chinese

Power supply Power adapter: DC5V/2A, support DV5-23V wide voltage

Battery: 3.7V/1200mAh,

After the DVR starts, it can be used for about 2.5 hours on full battery

DVR is off, about 3.5 hours with full battery

Power consumption:

Normal mode: the device works at 3.7V and the current is 400mA

Recording mode: The working current of the device is 620mA at 3.7V

The maximum charging current of the built-in battery is 500mA

Wireless channel table

Body size: 146*80*13mm

Weight: 159g (not including antenna)

Note: video input cannot be recorded from the AV port
 

Key Description:

1. Power: Short press to enter the menu bar, long press for 2 seconds to turn on/off.

2.Search: Short press to enter automatic search, long press for 1.5 seconds to enter the AV interface.

3. Rec: Short press to start recording, then short press to close recording

4. Band+: Short press to enter the frequency point (A-B-E-F-R frequency point cyclically switch)

5. CH+: Short press to enter the frequency band (1-2-3-4-5-6-7-8 frequency band cyclically switch)

6. Antenna A port: inner needle

7. Antenna B port: inner needle

8. AV: Support video input and audio output.

9.DC/5-23V: Micro-USB charging, support DC5-23V wide voltage.

10.TF CARD: TF card slot

11.RESET: Reset button

12. Charging indicator: when charging, the red light is on, when the battery is full, the green light is on

13. Video indicator: display the different working status of the dvr module

Menu command:

In the standby state, short press Power to enter the menu bar.

In the menu bar mode:

Button 1: Scrollable options.

Button 2: Automatically search for channels

Button 3: invalid

Button 4: Turn up the sound

Button 5: Turn down the sound

Playback instructions:

In the menu bar mode, select the DVR option bar to enter the DVR mode.

In DVR mode

Button 1: return/exit playback mode

Button 2: Delete the current file

Button 3: Play/Pause

Button 4: Select video forward/Adjustable fast forward when playing video

Button 5: Select video backward/Adjustable rewind when playing video